Cool off your vapor and enhance your flavor with the Linx Bubbler Attachment. This easy-to-use water bubbler attachment is an ideal addition to your Linx Vapor vaporizer for amazing taste, flavor, and of course that rejuvenating bubbly noise. It is a 4-1/2″, clear, attachable glass bubbler, with 4 Silicone O-rings. This Glass Bubbler is designed to be compatible with the Linx Ares, Linx Hypnos Zero, and Linx Gaia.
The Linx Glass Bubbler is NOT compatible with: Ember, Hermes 2 & 3 and is ONLY usable with the Eden if you have the Eden Glass Bubbler Attachment.
How to use the Linx Bubbler:
Fortunately, the Linx Glass Bubbler Attachment is fairly easy to operate. Before getting started, we recommend you find a sink, or a place that you can get wet as you set up your bubbler. Start by turning the bubbler upside down and filling with water. If you are using a sink, use lower water pressure for an drier time, since it won’t need much water. Once it is filled, flip the bubbler right-side-up to let the excess water drain out. Exhale through the bubbler to test it, and gently blow any excess water out of the bubbler. After this, you will ideally be left with about a centimeter of water sitting comfortably in the bottom of the bubbler. Wipe any excess water off of the outside of your bubbler before attaching to avoid dripping water on your vaporizer.
To attach the Linx Bubbler to your vaporizer, slide 2 of the attached rings onto your Linx mouthpiece. Once the rings are attached, place the bottom of the bubbler on the mouthpiece, and gently push and twist the bubbler until it is secure on your device. Be sure to hold both your vaporizer and bubbler carefully during this process, so you do not drop it. Once your bubbler is attached, you are now ready to use!