LinkStar VSAT modem
Linkstar VSAT terminal DVB, Channel Master
antenna, New Japan Radio

LinkStar™ is the star-based VSAT
system for service providers, ISPs, and corporate network
managers who are seeking a system based on DVB standards.
LinkStar's edge is in its dynamic bandwidth allocation that
makes it more efficient and faster than other TDMA systems.
Terminals can transmit data to the network hub at speeds up to
1.15 Mbps, with data downloads of up to 60 Mbps, satisfying
bandwidth-intensive applications using IP data.
LinkStar offers several benefits:
- The highest return channel rate on the market
- Rate-based operation that increases your data throughput
- Guaranteed information rates for each network location
- Lower-cost terminals because fewer hardware components are needed and volumes increase as markets expand
- DVB standards based for compatibility worldwide
LinkStar can operate over C- or Ku-band frequencies, and is
scalable to small or large networks. A Web-based NMS makes it
simple to operate and easy to configure.
LinkStar Broadband Applications:
- Internet access
- Digital media streaming
- Videoconferencing
- Distance education
- File transfer
- Multicasting
- Virtual private networks
LinkStar satellite VSAT terminal
/ViaSat/ DVB
BoD VSAT modem, 1.15 mbps/ 60 mbps in
TDMA, C-band, Ku-band, Ka-band, DVB - RCS and Turbo Coding,
DVB-based architecture, IP router with RIP, IGMP, CRTP, UDP,
TCP, QoS support, HTTP management, SNMP agent, Sun Solaris
Workstation.
RETURN CHANNEL, Format: MF-TDMA, Symbol Rates: 156, 312, 625
Ksps, 1.25 Msps, Transmit IF, Frequency: 950 to1450 MHz, Turbo
Coding: DVB-RCS compliant, Modulation: QPSK, BPSK,
OUTBOUND CHANNEL (FROM HUB), Format: DVB/MPEG-2 transport
stream (ISO/IEC 13818), DVB-MPE, (Multi-protocol Encapsulation)
for IP data PCR, insertion, Symbol Rates: 5 to 42.5 Msps, FEC:
DVB-compliant R/S (204, 188) and convolution , (R=1/2, 2/3,
3/4,5/6, 7/8), BER: Quasi-error free per DVB standard,
Modulation: QPSK or 8PSK(future), Receive IF Frequency: 950 to
2150 MHz,
PHYSICAL INTERFACES, L-band Transmit and
Receive: 2 Type-F, 75 ohm, Network: (1) 10/100BaseT, Ethernet
(RJ-45)
RF, Antenna Diameters: 0.96, 1.2, 1.8, 2.4 M, ODU
Power: 1, 2, 4, 5 watt, ODU Operating Temperature: -40°C to
55°C
IDU MECHANICAL/ENVIRONMENTAL, Dimensions: 1U high,
13” W, 8” D, Power: 110/220 VAC,, auto-sensing,
auto-ranging, Temperature: 0° to 40°C operating; -20°
to 70°C storage , Humidity: 95%, relative humidity
non-condensing at 0° to 40°C operating; 90% relative
humidity non-condensing at 65°C storage
NETWORK
MANAGEMENT AND CONTROL, Network Management System (NMS): Java
Web-based,standard PC Network Control Center (NCC): Redundant
SUN Solaris Workstation; SNMP agent
PERFORMANCE, TCP
Acceleration: 10 Mbps throughput, Scalability: 10,000 nodes
with single, Hub/NCC; 100,000, nodes with multiple Hub/NCC,
Protocols: TCP/IP, UDP/IP, IGMP, RIP 1&2, IP QoS support
COMPLIANCE, Safety: UL/cUL 60950; CE (EN60950), EMI/EMC: FCC
part 15 Class B; VCCI Class B; , AS/NZS3548 Class B; BSMI; CE
(EN 301 489-12, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3,
RF Spectrum: CE (EN 301 428, EN 301 443)
Download overview and
specifications (PDF)
New Japan Radio Co., Ltd.
receiver
Input Waveguide Flange WR75, Output
Connector Type F-female, Noise Figure (at 25 °C) 0.8 dB
typ., Conversion Gain (at 25 °C) 54 dB typ., Conversion Gain
Variation (at 25 °C) 2 dB max. In any 50 MHz, segment over
the frequency band, Phase Noise (SSB) -60 dBc/Hz at 1 kHz, -80
dBc/Hz at 10 kHz, -100 dBc/Hz at 100 kHz, Power Requirement +15
to +24V dc, Power Consumption 170 mA max., Operating
Temperature Range -40 to +60 °C, Storage Temperature Range
-40 to +80 °C
Download overview and
specifications (PDF)
New Japan Radio Co., Ltd.
transmitter
Output Power +33 dBm, Phase Noise (SSB)
-60 dBc/Hz max. @ 100 Hz, -70 dBc/Hz max. @ 1 kHz
-80
dBc/Hz max. @ 10 kHz, -90 dBc/Hz max. @ 100 kHz, Required
External Reference Signal, Frequency : 10 MHz, Input Power : -5
to +5 dBm, Phase Noise : -135 dBc/Hz max. @ 100 Hz, -140 dBc/Hz
max. @ 1 kHz, -143 dBc/Hz max. @ 10 kHz, -143 dBc/Hz max. @ 100
kHz, Input Interface N-type, female (50 ohm) [Model No.
NJT5024], F-type, female (75 ohm) [Model No. NJT5024F], Input /
Output V.S.W.R. 2.0:1 max. @ Input, 2.0:1 max. @ Output, Mute
Shut off the HPA in case of LO unlocked, Power Requirement +15
to +24 V dc, Power Consumption 3.0 A max.
Download overview and
specifications (PDF)
Channel Master 960
antenna
MECHANICAL PERFORMANCE, SPECIFICATIONS,
Reflector Material Glass Fiber Reinforced Polyester, Antenna
Optics One-Piece Offset Feed Prime Focus- Long Focal Length,
Mount Type Elevation over Azimuth, Elevation Adjust. Range
7°-90° Continuous Fine Adjustment, Azimuth Adjust.Range
360° Continuous; ± 20° Fine Adjust., Mast Pipe
Interface 2.88-3.00 in. (73-76 mm) Diameter, Wind Loading
Operational 45 mi/h (72 km/h), Survival 125 mi/h (200 km/h),
Temperature -50°C to 80° C, Humidity 0 to 100%
(Condensing), Atmosphere Salt, Pollutants and Contaminants as
Encountered in Coastal and Industrial Areas, Solar Radiation
360 BTU/h/ft2, Shock and Vibration As Encountered During
Shipping and Handling
Download overview and
specifications (PDF)